MIG14403

MIG14403

144 kV Lightning voltage impulse generator

User configurable modular design from 72 kV to 144 kV in 24 kV stages. High voltage output on contacting ring. Separate control unit with integrated voltage and current dividers. Mounted on wheels for easy placement.

The MIG14403 is an insulation tester with a voltage wave shape 1,2/50 μs. The specified voltage waveform is generated across an open circuit (oc), or within the specified load range. For failure detection (breakdown, flashover) the peak output voltage and current of the MIG are indicated on the front display and the two BNC monitor outputs (v,i) allow monitoring the voltage and current wave shapes on an oscilloscope. MIG14403 uses solid state switching components maintaining a consitent waveshape over the full range up to 144 kV. The generator is a modular construction comprsing 24kV modules which can be stacked to achieve voltages from 36 kV to 144 kV. 

 Pulses

  • Combination Wave

 Documents

 Insulation Test System

 Your Benefits

  • Voltage impulse 1.2/50 us
  • Solid state impulse discharge switch
  • 24 kV modules
  • Integrated peak measurement circuit
  • Convenient BNC mpnitor outputs
  • User configurable from 36 kV to 144 kV
  • Extreme reliability
  • Long duration test impulse repeatability
  • Easy monitoring of impulse on an oscilloscope

 Product Options

 


Impulse insulation testing
User configurable modular design from 72 kV to 144 kV in 24 kV stages. High voltage output on contacting ring. Separate control unit with integrated voltage and current dividers. Mounted on wheels for easy placement.
144 kV Lightning voltage impulse generator
insulation test, 1.2/50, 500 ohm, 48 ohm impedance
Safety in accordance with VDE 0104 (safety circuit, connector for warning lamp)

High degree of automation, reduces operator workload High degree of automation, reduces operator workload

  • Combination Wave

MIG14403 - Your Benefits


  • Solid state impulse switch and solid state polarity change (no mechanical switch, no spark gaps or tubes) - advantages: low jitter, no high frequency switching noise.

  • Microprocessor menu controlled, printer port and RS232 remote control

  • Safety in accordance with VDE 0104 (safety circuit, connector for warning lamp)

  • Integrated peak measurement for voltage and current. Peak display and monitor output for v,i

  • Impulse generator fits through standard door width 80 cm
104113
IEC 60060-1
  • IEC 60664-1
  • IEC 61180
  • IEC 62771-1
  • Insulation
    INS (40 Ohm)
    IEC 61000-4-5
    IEC 60060-1
    IEC 61010-1
    Standard control unit, reduces user training
    Measurement system delivers information about insulation breakdown
    Pass / Fail indication for individual samples, speeds up production
    Solid state impulse switch and solid state polarity change (no mechanical switch, no spark gaps or tubes) - advantages: low jitter, no high frequency switching noise.
  • Microprocessor menu controlled, printer port and RS232 remote control
  • Integrated peak measurement for voltage and current. Peak display and monitor output for v,i
    Impulse generator fits through standard door width 80 cm

    Address

    EMC PARTNER AG
    Baselstrasse 160
    CH - 4242 Laufen
    Switzerland

    Follow us